Despite the importance of landsliding in routing sediment through mountainous drainage basins, few studies have documented landsliding rates over extended time and space scales. We have investigated landsliding in surficial material in the Queen Charlotte Islands using a large inventory of events, derived from aerial photography, covering an area of 166.7 km2. The mean erosion rate for shallow landsliding is 0.10 mm·a-1, which is at the upper end of shallow landsliding rates observed in the Pacific Northwest and coastal British Columbia, but several orders of magnitude lower than rock-based landsliding rates reported in the literature. Probability distributions for landslide area and volume are somewhat convex in form. Flattening of the curve found at low magnitudes may be due to sampling bias or physical mechanisms inhibiting failure, and the steepening for high values may exist because the sampling period is not long enough to adequately represent large events. Landslides generally initiate on hillslope gradients greater than 0.50-0.60. The largest numbers of landslides occur on south- to southwest-facing slopes and east- to northeast-facing slopes. Most events occur on concave and straight hillslopes in upper-slope positions. Landsliding rates were found not to be affected by rock type. Hillslopes in the Queen Charlotte Islands are often mantled by weathered Quaternary deposits and, hence, landsliding events are not directly controlled by weathering of bedrock. About 31% of landslides identified in this study deposited material in stream reaches, with about 83% of these landslides deposited in reaches with gradients between 3% and 10%.
BC Forest Service - Research Division. 2002. Sediment transfer by shallow landsliding in the Queen Charlotte Islands, British Columbia. British Columbia Ministry of Forests, Lands, Natural Resource Operations and Rural Development
Topic: FLNRORD Research Program
Keywords: sediment, landslide, queen charlotte islands
To copy the URL of a document, Right Click on the document title, select "Copy Shortcut/Copy Link", then paste as needed. Only documents available to the public have this feature enabled.